Отправить ответ

avatar
adam curtis

Help! I got into that mode and it shows F6 E2?

Abdiel Velez Santiago

Wow, your short video helped us out. It fixed our washer. After we replaced the valve ($80.00) it kept up with the same issue. We follow your steps and when the panel showed C006 and let it run for a while, we pressed the power bottom. Then pressed the spin/drain cycle. After that it worked fine. Thank you so much for your help and evereyone who wrote a comment. I think that what triggered the issue was putting a load of small carpets in the washer, too heavy when it soaks.

Dallas Wilson

How do you get it out of this mode? Answer that one. For real.

Sabrosita Pr

I have the same washer and it doesn't want to turn on

Jay Wilson

My Maytag washer will turn on and off by its self but won’t start the self diagnostic will have start button flash but screen is off and won’t start if I leave it unplugged a few days it will do a few loads but that’s it the washer shut off during one self diagnostic so I unpluged it a few minuets it finished draining but no lights came on

Mauricio Maldonado

My washer is nuts. The delivery installer inverted the cold and hot hoses and my machine now washes cold with hot and hot with cold. I fixed the hose connections, but my washer is still doing it wrong. Will this help my issue? Hoping somone will answer. Thanks.

leanne smith

Wow. Sigh relief. This worked on my MHW3505FW Thank you Dean Riley!!

Dean Riley

Thank you!!! I used this method to “unstick” my F8 error caused by forgetting to turn the water back on after vacation. Couldn’t unlock, or turn off, even after turning power to the laundry room a couple times. This worked perfectly. Saved a big repair bill, I’m sure.

Dean Riley

Thank you!!! I used this method to “unstick” my F8 error caused by forgetting to turn the water back on after vacation. Couldn’t unlock, or turn off, even after turning power to the laundry room a couple times. This worked perfectly. Saved a big repair bill, I’m sure.

Jack Blankenship

this worked for me on a Maytag bravos xl!

Kevin Scott

That isn't working for me, can you tell me where you found the diagnostic set up info? I'm wondering if there is a different one for my model. The keyboard has a mind of it's own and makes all kinds of noises.

#BAYMAAC

Thank you so much... My Maytag MHW7100D had the error E01 F08 but I had no way of knowing because the door was locked... With this video I was able to get the door unlocked and get the code to display...

Adrian Young

but what happens after. it say CO and sprayed some water then sat with CO

Martin Zeidel

The spin speed button cycles through all the error codes, and thanks for the post!

wpDiscuz